Standard Features
  • Motor: Reversing, brushless, capacitor run 115 VAC 50/60 Hz, single phase
  • Overload protection: Integral thermal overload protection for motor windings with automatic reset
  • Gear train: Permanently lubricated, solid gear that is Rockwell hardened
  • Corrosion resistant housing: Thermally bonded baked powder coating with stainless steel trim
  • ISO mounting configuration
  • Conduit: Two 1/2" NPT conduit entries to eliminate cross feed between control, feedback, and power signals
  • Position indication: Highly visible beacon position indicator for positive position of valve, even at a distance
  • Declutchable manual override: Pull up on indicator knob, insert 5/8" wrench onto flats and rotate in the appropriate direction (CCW for open, CW for close). Models with handwheel override do not require a wrench. Simply push down on handwheel until engaged with cam and rotate
  • Limit switches: Standard end of travel limit switches can be used for light indication (not to be use with PLC for position confirmation)
  • Enclosure: Combination NEMA 4X, 7 & 9 enclosure for use in various environments
  • Corrosion resistant mounting: Mounting is with PPG or stainless steel bracket, stainless steel coupling, and stainless steel hardware
  • CE compliant motor: All 115 VAC and 230 VAC motors are CE compliant and stamped as such
  • Extended duty cycles: Our extended duty cycles are ideal for modulating and high cycling applications
  • Output torque: Series 92 Electric Actuators have an output torque range from 400 in/lbs to 2000 in/lbs


Options
  • Auxiliary (additional) limit switches
  • Feedback potentiometer
  • Heater and thermostat
  • 4-20 mA Positioner (Modulating PCB)
  • Mechanical brake
  • 4-20 output source (Transmitter)
  • Cycle length control module (CLC)
  • Two-wire control
  • Failsafe battery back up (Protek)
  • Voltages
  • Local Remote Station
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Item #

Torque

Amp Draw - 115 Vac

Duty Cycle - 115 Vac

Cycle Time per 90 Degrees

Weight

N/A 400 in/lbs N/A 0.5 N/A 100 % N/A 10 sec N/A 15.3 lbs
N/A 700 in/lbs N/A 0.8 N/A 75 % N/A 10 sec N/A 15.3 lbs
N/A 1100 in/lbs N/A 0.5 N/A 100 % N/A 25 sec N/A 15.3 lbs
N/A 2000 in/lbs N/A 1.0 N/A 50 % N/A 25 sec N/A 18.3 lbs
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1